Release 0.7.0

Row size (Settings, App drawer, Style): Compact is the list as it was, Comfy
has taller rows, larger icons and slightly larger names and letter headers.

In the open drawer the alphabet no longer reserves the screen edge. Its letters
rest 30dp from the edge, clear of the strip where Android starts Back. A touch
that starts on that strip becomes a scrub once it moves up or down or rests for
a moment; a sideways swipe is left to Android and goes back. The band that
starts a scrub from the home screen is narrower than the one in the drawer.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>

flexera/res/values/flexera_dimens.xml

@@ -8,6 +8,12 @@
     <dimen name="flexera_drawer_row_icon_size">34dp</dimen>
     <dimen name="flexera_drawer_row_icon_gap">16dp</dimen>
     <dimen name="flexera_drawer_row_text_size">15sp</dimen>
+    <!-- The "comfy" row size the owner can choose instead (Settings, App drawer): a little
+         larger all round, between compact and the first version. -->
+    <dimen name="flexera_drawer_row_height_comfy">58dp</dimen>
+    <dimen name="flexera_drawer_row_icon_size_comfy">40dp</dimen>
+    <dimen name="flexera_drawer_row_icon_gap_comfy">18dp</dimen>
+    <dimen name="flexera_drawer_row_text_size_comfy">16sp</dimen>
     <!-- Row padding on the edge without the wave alphabet. The search bar lines up with it. -->
     <dimen name="flexera_drawer_row_padding_start">24dp</dimen>
     <!-- Row padding on the wave alphabet's edge, which is the end edge unless the owner moves it
@@ -15,10 +21,15 @@
     <dimen name="flexera_drawer_row_padding_end">56dp</dimen>
 
     <!-- Wave alphabet (PRD AD-4 to AD-6). -->
-    <!-- How wide a band along the edge starts a scrub when touched. -->
-    <dimen name="flexera_wave_touch_width">40dp</dimen>
-    <!-- Where the letters rest, measured from the edge. -->
-    <dimen name="flexera_wave_edge_inset">16dp</dimen>
+    <!-- How wide a band along the edge starts a scrub when touched in the open drawer. -->
+    <dimen name="flexera_wave_touch_width">60dp</dimen>
+    <!-- The same band on the home screen, where nothing shows it: narrower, so that fewer
+         swipes that only pass near the edge are taken for a scrub (PRD AD-10). -->
+    <dimen name="flexera_wave_home_touch_width">40dp</dimen>
+    <!-- Where the letters rest, measured from the edge. Inward of the strip of edge where
+         Android starts its Back swipe (about 24dp), so a thumb on the letters is not on it.
+         (First version: 16dp, with the whole edge reserved, which left no Back swipe.) -->
+    <dimen name="flexera_wave_edge_inset">30dp</dimen>
     <dimen name="flexera_wave_letter_size">12sp</dimen>
     <!-- Letters never sit further apart than this, however few there are. Close together, a
          little closer than Niagara Launcher's, so a whole alphabet is about 83 mm tall and fits
@@ -63,4 +74,7 @@
     <dimen name="flexera_drawer_header_height">34dp</dimen>
     <dimen name="flexera_drawer_header_padding_bottom">4dp</dimen>
     <dimen name="flexera_drawer_header_text_size">12sp</dimen>
+    <dimen name="flexera_drawer_header_height_comfy">38dp</dimen>
+    <dimen name="flexera_drawer_header_padding_bottom_comfy">5dp</dimen>
+    <dimen name="flexera_drawer_header_text_size_comfy">13sp</dimen>
 </resources>

flexera/res/values/flexera_strings.xml

@@ -27,6 +27,38 @@
     <string name="flexera_about_built_on_title">Lawnchair</string>
     <string name="flexera_about_built_on_body">Flexera Launcher is a modified version of Lawnchair, the open-source launcher made by the Lawnchair team. Lawnchair is itself based on Launcher3 from the Android Open Source Project.</string>
     <string name="flexera_about_lawnchair_source">Lawnchair source code</string>
+    <!-- Import of a Smart Launcher backup (app.flexera.backup) -->
+    <string name="flexera_import_smart_launcher">Import from Smart Launcher</string>
+    <string name="flexera_import_smart_launcher_description">Home screens, folders and widgets from a Smart Launcher backup file (.slbk)</string>
+    <string name="flexera_import_found">In this backup</string>
+    <string name="flexera_import_screens">Home screens</string>
+    <string name="flexera_import_screens_value">%1$d, on a grid of %2$d by %3$d</string>
+    <string name="flexera_import_apps">Apps on the home screens</string>
+    <string name="flexera_import_folders">Folders</string>
+    <plurals name="flexera_import_folders_value">
+        <item quantity="one">%1$d, holding %2$d app</item>
+        <item quantity="other">%1$d, holding %2$d apps</item>
+    </plurals>
+    <string name="flexera_import_widgets">Widgets</string>
+    <string name="flexera_import_widgets_value">%1$d. Each arrives in its place as “tap to set up”: Android asks you to allow it again, and its own settings start fresh.</string>
+    <string name="flexera_import_left_out">Left out</string>
+    <string name="flexera_import_own_widgets">Widgets of Smart Launcher itself</string>
+    <plurals name="flexera_import_own_widgets_value">
+        <item quantity="one">%1$d. It exists only inside Smart Launcher, so its place stays empty.</item>
+        <item quantity="other">%1$d. They exist only inside Smart Launcher, so their places stay empty.</item>
+    </plurals>
+    <string name="flexera_import_skipped">Other items</string>
+    <plurals name="flexera_import_skipped_value">
+        <item quantity="one">%1$d that this launcher cannot show or place</item>
+        <item quantity="other">%1$d that this launcher cannot show or place</item>
+    </plurals>
+    <string name="flexera_import_effect">What importing does</string>
+    <string name="flexera_import_effect_title">Replaces your current home screens</string>
+    <string name="flexera_import_effect_body">The home screens you have now are removed. The grid takes the size it has in the backup and the dock is switched off, because Smart Launcher has none; both can be changed again in Settings. Icons of apps that are not installed on this phone are dropped. Make a backup first if you want to be able to go back.</string>
+    <string name="flexera_import_action">Import</string>
+    <string name="flexera_import_done">Imported</string>
+    <string name="flexera_import_failed">The import failed</string>
+    <string name="flexera_import_unreadable">This is not a Smart Launcher backup that can be read</string>
     <string name="flexera_about_share">Share</string>
     <string name="flexera_about_share_title">Scan to get Flexera Launcher</string>
     <string name="flexera_about_share_qr_description">QR code that opens the download page</string>
@@ -42,6 +74,9 @@
     <!-- The drawer's wave alphabet -->
     <!-- Read by screen readers as the name of the alphabet strip, followed by the current letter -->
     <string name="flexera_alphabet_description">Alphabet</string>
+    <string name="flexera_row_size">Row size</string>
+    <string name="flexera_row_size_compact">Compact</string>
+    <string name="flexera_row_size_comfy">Comfy</string>
     <string name="flexera_alphabet_search">Search</string>
     <!-- App drawer settings (app.flexera.ui.FlexeraDrawerSettings) -->
     <string name="flexera_notification_previews">Notification previews</string>
@@ -58,7 +93,15 @@
     <string name="flexera_update_check_idle">Flexera Launcher also checks on its own, once a day</string>
     <string name="flexera_update_checking">Checking for updates…</string>
     <string name="flexera_update_up_to_date">You have the latest version</string>
-    <string name="flexera_update_check_failed">Couldn\'t reach the update server. Check your connection, then tap to try again.</string>
+    <!-- Why a check for updates failed. %1$s is the update server's name, such as git.example.org -->
+    <string name="flexera_update_failed_no_permission">Android does not let Flexera Launcher use the network on this phone. Allow it in the phone\'s settings for this app, under Permissions, Network, then tap to try again.</string>
+    <string name="flexera_update_failed_not_found">This phone could not find %1$s. Check the connection and any VPN or private DNS, then tap to try again.</string>
+    <string name="flexera_update_failed_no_answer">%1$s did not answer. Check the connection and any VPN, then tap to try again.</string>
+    <string name="flexera_update_failed_not_secure">A secure connection to %1$s could not be made. Check the phone\'s date and time and any VPN, then tap to try again.</string>
+    <string name="flexera_update_failed_server_error">%1$s answered with an error. Tap to try again later.</string>
+    <string name="flexera_update_failed_bad_answer">The answer from %1$s could not be read. Tap to try again later.</string>
+    <!-- %1$s is the error in the system\'s own words, for whoever looks for the cause -->
+    <string name="flexera_update_failed_detail">Details: %1$s</string>
     <!-- %1$s is a version number such as 0.2.0 -->
     <string name="flexera_update_download">Download version %1$s</string>
     <!-- %1$s is a file size such as 24 MB -->

flexera/src/app/flexera/backup/SmartLauncherBackupConverter.kt

@@ -0,0 +1,619 @@
+package app.flexera.backup
+
+import android.content.ComponentName
+import android.content.ContentValues
+import android.content.Context
+import android.content.Intent
+import android.content.pm.LauncherApps
+import android.database.sqlite.SQLiteDatabase
+import android.net.Uri
+import android.os.Process
+import android.util.Log
+import app.lawnchair.DeviceProfileOverrides
+import app.lawnchair.backup.LawnchairBackup
+import app.lawnchair.preferences.PreferenceManager
+import app.lawnchair.preferences2.PreferenceManager2
+import com.android.launcher3.GridType
+import com.android.launcher3.InvariantDeviceProfile
+import com.android.launcher3.LauncherSettings.Favorites
+import com.android.launcher3.model.DatabaseHelper
+import com.android.launcher3.model.DeviceGridState
+import com.android.launcher3.model.ModelDbController
+import com.android.launcher3.pm.UserCache
+import com.android.launcher3.provider.RestoreDbTask
+import com.android.launcher3.shortcuts.ShortcutKey
+import com.android.launcher3.shortcuts.ShortcutRequest
+import java.io.File
+import java.io.FileInputStream
+import java.io.FileOutputStream
+import java.net.URISyntaxException
+import java.util.UUID
+import java.util.zip.ZipInputStream
+import javax.xml.parsers.DocumentBuilderFactory
+import kotlin.math.max
+import kotlin.math.roundToInt
+import kotlinx.coroutines.Dispatchers
+import kotlinx.coroutines.withContext
+import org.json.JSONObject
+
+/**
+ * Imports the home screens of a Smart Launcher backup: icons, folders and widgets, each in the
+ * place it had, on a grid of the same size and, like Smart Launcher, without a dock.
+ *
+ * A backup (a .slbk file) is a zip of Smart Launcher's own files. Two of them matter here:
+ *  - `databases/ginlemon.flower.db`, a SQLite database. Its table `HomeItem` has one row per
+ *    thing on a home screen (screen, cell, size) that points either at a `Launchable`, which
+ *    `Action` describes with an ordinary Android intent, or at a `Widget` with its provider.
+ *    A folder is a launchable too; its members are the launchables that name it as their parent.
+ *  - the preferences file under `shared_prefs/`, where `launcher_profile_#0` holds the grid.
+ *
+ * The format is not documented. This follows one real backup, of Smart Launcher's data
+ * version 64, and refuses a file in which it does not find these tables.
+ *
+ * What cannot come along is said to the owner before the import ([Info]): Smart Launcher's own
+ * widgets, which exist only inside Smart Launcher, and items of other profiles. A widget that
+ * does come along arrives as "tap to set up": Android has every launcher ask for its widgets
+ * itself, and keeps a widget's settings with the launcher that made it.
+ *
+ * The layout is handed to Launcher3 the way Lawnchair's Nova import hands over its own
+ * (see [app.lawnchair.backup.NovaBackupConverter]): as a database of Launcher3's own shape,
+ * which Launcher3's restore code then takes in.
+ */
+class SmartLauncherBackupConverter(
+    private val context: Context,
+    private val uri: Uri,
+) {
+
+    /** What a backup holds, for the owner to see before agreeing to the import. */
+    data class Info(
+        val columns: Int,
+        val rows: Int,
+        val screens: Int,
+        val apps: Int,
+        val folders: Int,
+        val appsInFolders: Int,
+        val widgets: Int,
+        /** Smart Launcher's own widgets, which stay behind. */
+        val ownWidgets: Int,
+        /** Other things that stay behind: no usable target, another profile, or no free cells. */
+        val skipped: Int,
+    )
+
+    /** Where a thing sits on the home screens, in whole cells. */
+    private data class Place(val screen: Int, val x: Int, val y: Int, val width: Int, val height: Int)
+
+    /** An icon: an app, or a shortcut into an app ([shortcutId] with [packageName]). */
+    private data class Icon(
+        val title: String?,
+        val intentUri: String,
+        val packageName: String?,
+        val shortcutId: String?,
+    )
+
+    private sealed interface HomeThing {
+        val place: Place
+    }
+
+    private data class HomeIcon(override val place: Place, val icon: Icon) : HomeThing
+    private data class HomeFolder(override val place: Place, val title: String?, val icons: List<Icon>) : HomeThing
+    private data class HomeWidget(override val place: Place, val provider: String) : HomeThing
+
+    private data class Layout(
+        val columns: Int,
+        val rows: Int,
+        val showLabels: Boolean?,
+        val things: List<HomeThing>,
+        val ownWidgets: Int,
+        val skipped: Int,
+    ) {
+        val info: Info
+            get() = Info(
+                columns = columns,
+                rows = rows,
+                screens = things.map { it.place.screen }.distinct().size,
+                apps = things.count { it is HomeIcon },
+                folders = things.count { it is HomeFolder },
+                appsInFolders = things.sumOf { (it as? HomeFolder)?.icons?.size ?: 0 },
+                widgets = things.count { it is HomeWidget },
+                ownWidgets = ownWidgets,
+                skipped = skipped,
+            )
+    }
+
+    /** Reads the backup and says what is in it. Throws if it is not a backup this can read. */
+    suspend fun parseInfo(): Info = withContext(Dispatchers.IO) {
+        withUnpackedBackup { dir -> readLayout(dir).info }
+    }
+
+    /**
+     * Replaces the home screens with the backup's. The launcher has to be restarted afterwards
+     * to show them.
+     */
+    suspend fun convertAndRestore() {
+        val layout = withContext(Dispatchers.IO) { withUnpackedBackup { dir -> readLayout(dir) } }
+
+        withContext(Dispatchers.IO) {
+            val tempDir = newTempDir()
+            try {
+                val staged = File(tempDir, STAGED_DB)
+                val shortcuts = writeLauncherDb(layout, staged)
+                applyGrid(layout)
+
+                val restored = context.getDatabasePath(LawnchairBackup.RESTORED_DB_FILE_NAME)
+                restored.parentFile?.mkdirs()
+                staged.copyTo(restored, overwrite = true)
+                // Opening the controller moves the restored file into place; the restore task
+                // then marks every item as freshly restored, which is what makes Launcher3 ask
+                // for the widgets anew and drop icons of apps that are not installed.
+                check(RestoreDbTask.performRestore(context, ModelDbController(context))) {
+                    "Launcher3 did not accept the converted layout"
+                }
+                pinShortcuts(shortcuts)
+            } finally {
+                tempDir.deleteRecursively()
+            }
+        }
+
+        // Settings that make the result match the source: no dock, because Smart Launcher has
+        // none, and labels as they were. Last, so that a failed import changes nothing.
+        val prefs2 = PreferenceManager2.getInstance(context)
+        prefs2.isHotseatEnabled.set(false)
+        layout.showLabels?.let { prefs2.showIconLabelsOnHomeScreen.set(it) }
+    }
+
+    // ---- Reading the backup ------------------------------------------------------------------
+
+    private fun <T> withUnpackedBackup(block: (File) -> T): T {
+        val dir = newTempDir()
+        try {
+            unpack(dir)
+            return block(dir)
+        } finally {
+            dir.deleteRecursively()
+        }
+    }
+
+    private fun newTempDir(): File =
+        File(context.cacheDir, "$TEMP_DIR_PREFIX${UUID.randomUUID()}").apply { mkdirs() }
+
+    /**
+     * Unpacks the database and the preference files, and nothing else, into [dir]. Entry names
+     * come from the file and are not trusted: only the two known places are accepted, each file
+     * lands under its bare name, and a file of unreasonable size ends the import.
+     */
+    private fun unpack(dir: File) {
+        val descriptor = context.contentResolver.openFileDescriptor(uri, "r")
+            ?: error("Cannot open the backup file")
+        descriptor.use {
+            ZipInputStream(FileInputStream(it.fileDescriptor)).use { zip ->
+                var entry = zip.nextEntry
+                while (entry != null) {
+                    val name = entry.name
+                    val target = when {
+                        entry.isDirectory -> null
+                        name == SL_DB_ENTRY -> File(dir, SL_DB)
+                        name.startsWith(SL_PREFS_DIR) && name.endsWith(".xml") ->
+                            File(dir, PREFS_PREFIX + File(name).name)
+                        else -> null
+                    }
+                    if (target != null) {
+                        require(target.canonicalPath.startsWith(dir.canonicalPath + File.separator)) {
+                            "Backup entry outside the import folder: $name"
+                        }
+                        FileOutputStream(target).use { out ->
+                            val buffer = ByteArray(64 * 1024)
+                            var total = 0L
+                            while (true) {
+                                val read = zip.read(buffer)
+                                if (read < 0) break
+                                total += read
+                                require(total <= MAX_ENTRY_BYTES) { "Backup entry too large: $name" }
+                                out.write(buffer, 0, read)
+                            }
+                        }
+                    }
+                    entry = zip.nextEntry
+                }
+            }
+        }
+    }
+
+    private fun readLayout(dir: File): Layout {
+        val dbFile = File(dir, SL_DB)
+        require(dbFile.exists()) { "No Smart Launcher database in this file" }
+        val grid = readGrid(dir)
+
+        SQLiteDatabase.openDatabase(dbFile.absolutePath, null, SQLiteDatabase.OPEN_READONLY).use { db ->
+            for (table in listOf(T_HOME, T_LAUNCHABLE, T_ACTION, T_WIDGET)) {
+                require(tableExists(db, table)) { "Smart Launcher database without table $table" }
+            }
+            return readHomeScreens(db, grid)
+        }
+    }
+
+    private data class Grid(val columns: Int, val rows: Int, val showLabels: Boolean?)
+
+    /** The home grid from the preferences, or null where a backup does not state it. */
+    private fun readGrid(dir: File): Grid? {
+        val files = dir.listFiles { file -> file.name.startsWith(PREFS_PREFIX) } ?: return null
+        for (file in files) {
+            try {
+                val document = DocumentBuilderFactory.newInstance().newDocumentBuilder().parse(file)
+                val strings = document.documentElement.getElementsByTagName("string")
+                for (i in 0 until strings.length) {
+                    val node = strings.item(i)
+                    val name = node.attributes?.getNamedItem("name")?.nodeValue ?: continue
+                    if (!name.startsWith(SL_PROFILE_KEY_PREFIX)) continue
+                    val settings = JSONObject(node.textContent).optJSONObject("gridUserSettings") ?: continue
+                    val columns = settings.optInt("columns", 0)
+                    val rows = settings.optInt("rows", 0)
+                    if (columns in 1..MAX_GRID && rows in 1..MAX_GRID) {
+                        val labels = if (settings.has("hasLabel")) settings.optBoolean("hasLabel") else null
+                        return Grid(columns, rows, labels)
+                    }
+                }
+            } catch (e: Exception) {
+                Log.w(TAG, "Unreadable preference file in backup: ${file.name}", e)
+            }
+        }
+        return null
+    }
+
+    private fun readHomeScreens(db: SQLiteDatabase, grid: Grid?): Layout {
+        data class Row(
+            val launchable: Long?,
+            val widget: Long?,
+            val screen: Int,
+            val x: Int,
+            val y: Int,
+            val width: Int,
+            val height: Int,
+        )
+
+        // Smart Launcher can keep more than one arrangement ("configId"); the first is the one
+        // in use on a phone held upright.
+        val rows = ArrayList<Row>()
+        db.rawQuery(
+            "SELECT idLaunchable, idWidget, screen, cellX, cellY, spanX, spanY FROM $T_HOME " +
+                "WHERE configId = (SELECT MIN(configId) FROM $T_HOME) ORDER BY zIndex, id",
+            null,
+        ).use { c ->
+            while (c.moveToNext()) {
+                rows.add(
+                    Row(
+                        launchable = if (c.isNull(0)) null else c.getLong(0),
+                        widget = if (c.isNull(1)) null else c.getLong(1),
+                        screen = c.getInt(2),
+                        x = c.getDouble(3).roundToInt(),
+                        y = c.getDouble(4).roundToInt(),
+                        width = c.getDouble(5).roundToInt().coerceAtLeast(1),
+                        height = c.getDouble(6).roundToInt().coerceAtLeast(1),
+                    ),
+                )
+            }
+        }
+
+        val columns = grid?.columns ?: max(MIN_GRID, rows.maxOfOrNull { it.x + it.width } ?: 0)
+        val gridRows = grid?.rows ?: max(MIN_GRID, rows.maxOfOrNull { it.y + it.height } ?: 0)
+        // Launcher3 numbers its screens from 0 without gaps, left to right.
+        val screenIndex = rows.map { it.screen }.distinct().sorted().withIndex().associate { it.value to it.index }
+        val taken = HashSet<Triple<Int, Int, Int>>()
+
+        val things = ArrayList<HomeThing>()
+        var ownWidgets = 0
+        var skipped = 0
+        for (row in rows) {
+            val screen = screenIndex.getValue(row.screen)
+            val place = Place(screen, row.x, row.y, row.width, row.height)
+            val cells = cellsOf(place)
+            // Launcher3 keeps one thing per cell and nothing outside the grid.
+            val fits = row.x >= 0 && row.y >= 0 && row.x + row.width <= columns &&
+                row.y + row.height <= gridRows && cells.none { it in taken }
+
+            val read: HomeThing? = when {
+                row.widget != null -> readWidgetProvider(db, row.widget)?.let { HomeWidget(place, it) }
+                row.launchable != null -> readLaunchable(db, row.launchable, place)
+                else -> null
+            }
+            when {
+                // The only widgets without a provider this can use are Smart Launcher's own.
+                read == null && row.widget != null -> ownWidgets++
+                read == null || !fits -> skipped++
+                else -> {
+                    things.add(read)
+                    taken.addAll(cells)
+                }
+            }
+        }
+        return Layout(columns, gridRows, grid?.showLabels, things, ownWidgets, skipped)
+    }
+
+    private fun cellsOf(place: Place): List<Triple<Int, Int, Int>> = buildList {
+        for (x in place.x until place.x + place.width) {
+            for (y in place.y until place.y + place.height) {
+                add(Triple(place.screen, x, y))
+            }
+        }
+    }
+
+    /** The provider of an ordinary app widget, or null for one of Smart Launcher's own. */
+    private fun readWidgetProvider(db: SQLiteDatabase, id: Long): String? =
+        db.rawQuery("SELECT type, provider, userId FROM $T_WIDGET WHERE id = ?", arrayOf(id.toString())).use { c ->
+            if (!c.moveToFirst()) {
+                null
+            } else {
+                val type = c.getInt(0)
+                val provider = if (c.isNull(1)) null else c.getString(1)
+                val user = if (c.isNull(2)) OWNER_USER else c.getInt(2)
+                val component = provider?.let(ComponentName::unflattenFromString)
+                if (type != SL_WIDGET_TYPE_APP || component == null || user != OWNER_USER) {
+                    null
+                } else {
+                    component.flattenToString()
+                }
+            }
+        }
+
+    /** The icon or folder behind a launchable, or null if it has no target this can use. */
+    private fun readLaunchable(db: SQLiteDatabase, id: Long, place: Place): HomeThing? {
+        val action = readAction(db, id) ?: return null
+        if (action.type != SL_ACTION_TYPE_FOLDER) {
+            return action.toIcon()?.let { HomeIcon(place, it) }
+        }
+        val icons = ArrayList<Icon>()
+        db.rawQuery(
+            "SELECT id FROM $T_LAUNCHABLE WHERE idParentFolderLaunchable = ? ORDER BY position, id",
+            arrayOf(id.toString()),
+        ).use { c ->
+            while (c.moveToNext()) {
+                readAction(db, c.getLong(0))?.takeIf { it.type != SL_ACTION_TYPE_FOLDER }?.toIcon()?.let(icons::add)
+            }
+        }
+        // Launcher3 has no use for a folder with nothing in it.
+        return if (icons.isEmpty()) null else HomeFolder(place, action.label, icons)
+    }
+
+    private data class Action(
+        val type: Int,
+        val intentUri: String?,
+        val user: Int,
+        val label: String?,
+        val shortcutId: String?,
+    ) {
+        /** Launcher3's form of this action, if it opens an app or one of an app's shortcuts. */
+        fun toIcon(): Icon? {
+            // Icons of a work profile or a second user are left out; -1 means "no user", as on folders.
+            if (user != OWNER_USER && user != NO_USER) return null
+            val intent = try {
+                Intent.parseUri(intentUri ?: return null, 0)
+            } catch (_: URISyntaxException) {
+                return null
+            }
+            val component = intent.component
+            val packageName = component?.packageName ?: intent.`package`
+            return when {
+                !shortcutId.isNullOrEmpty() && packageName != null ->
+                    Icon(label, ShortcutKey.makeIntent(shortcutId, packageName).toUri(0), packageName, shortcutId)
+
+                component != null -> Icon(label, launchIntentFor(component).toUri(0), packageName, null)
+
+                else -> null
+            }
+        }
+    }
+
+    /** The first action of a launchable, which is what a tap does. */
+    private fun readAction(db: SQLiteDatabase, launchable: Long): Action? =
+        db.rawQuery(
+            "SELECT type, intentUri, userId, label, deepShortcutId FROM $T_ACTION " +
+                "WHERE idLaunchable = ? ORDER BY actionId LIMIT 1",
+            arrayOf(launchable.toString()),
+        ).use { c ->
+            if (!c.moveToFirst()) {
+                null
+            } else {
+                Action(
+                    type = c.getInt(0),
+                    intentUri = if (c.isNull(1)) null else c.getString(1),
+                    user = if (c.isNull(2)) OWNER_USER else c.getInt(2),
+                    label = if (c.isNull(3)) null else c.getString(3),
+                    shortcutId = if (c.isNull(4)) null else c.getString(4),
+                )
+            }
+        }
+
+    private fun tableExists(db: SQLiteDatabase, table: String): Boolean =
+        db.rawQuery("SELECT 1 FROM sqlite_master WHERE type = 'table' AND name = ?", arrayOf(table)).use {
+            it.moveToFirst()
+        }
+
+    // ---- Writing Launcher3's layout ----------------------------------------------------------
+
+    /**
+     * Writes [layout] as a Launcher3 database at [target]. Returns the app shortcuts in it, by
+     * package, which the launcher has to pin before it may show them.
+     */
+    private fun writeLauncherDb(layout: Layout, target: File): Map<String, Set<String>> {
+        val profileId = UserCache.INSTANCE.get(context).getSerialNumberForUser(Process.myUserHandle())
+        val shortcuts = HashMap<String, MutableSet<String>>()
+        val now = System.currentTimeMillis()
+        var nextId = 1
+
+        SQLiteDatabase.openOrCreateDatabase(target, null).use { db ->
+            db.version = DatabaseHelper.SCHEMA_VERSION
+            Favorites.addTableToDb(db, profileId, false)
+
+            fun insert(
+                container: Int,
+                place: Place?,
+                rank: Int,
+                itemType: Int,
+                title: String? = null,
+                intentUri: String? = null,
+                provider: String? = null,
+            ): Int {
+                val id = nextId++
+                db.insertOrThrow(
+                    Favorites.TABLE_NAME,
+                    null,
+                    ContentValues().apply {
+                        put(Favorites._ID, id)
+                        put(Favorites.TITLE, title)
+                        put(Favorites.INTENT, intentUri)
+                        put(Favorites.CONTAINER, container)
+                        put(Favorites.SCREEN, place?.screen ?: 0)
+                        put(Favorites.CELLX, place?.x ?: 0)
+                        put(Favorites.CELLY, place?.y ?: 0)
+                        put(Favorites.SPANX, place?.width ?: 1)
+                        put(Favorites.SPANY, place?.height ?: 1)
+                        put(Favorites.ITEM_TYPE, itemType)
+                        put(Favorites.APPWIDGET_ID, -1)
+                        put(Favorites.APPWIDGET_PROVIDER, provider)
+                        put(Favorites.MODIFIED, now)
+                        put(Favorites.RESTORED, 0)
+                        put(Favorites.PROFILE_ID, profileId)
+                        put(Favorites.RANK, rank)
+                        put(Favorites.OPTIONS, 0)
+                        put(Favorites.APPWIDGET_SOURCE, -1)
+                    },
+                )
+                return id
+            }
+
+            fun insertIcon(icon: Icon, container: Int, place: Place?, rank: Int) {
+                val isShortcut = icon.shortcutId != null && icon.packageName != null
+                if (isShortcut) {
+                    shortcuts.getOrPut(icon.packageName!!) { HashSet() }.add(icon.shortcutId!!)
+                }
+                insert(
+                    container = container,
+                    place = place,
+                    rank = rank,
+                    itemType = if (isShortcut) Favorites.ITEM_TYPE_DEEP_SHORTCUT else Favorites.ITEM_TYPE_APPLICATION,
+                    title = icon.title,
+                    intentUri = icon.intentUri,
+                )
+            }
+
+            db.beginTransaction()
+            try {
+                for (thing in layout.things) {
+                    when (thing) {
+                        is HomeIcon -> insertIcon(thing.icon, Favorites.CONTAINER_DESKTOP, thing.place, 0)
+
+                        is HomeFolder -> {
+                            val folder = insert(
+                                container = Favorites.CONTAINER_DESKTOP,
+                                place = thing.place,
+                                rank = 0,
+                                itemType = Favorites.ITEM_TYPE_FOLDER,
+                                title = thing.title,
+                            )
+                            thing.icons.forEachIndexed { rank, icon -> insertIcon(icon, folder, null, rank) }
+                        }
+
+                        is HomeWidget -> insert(
+                            container = Favorites.CONTAINER_DESKTOP,
+                            place = thing.place,
+                            rank = 0,
+                            itemType = Favorites.ITEM_TYPE_APPWIDGET,
+                            provider = thing.provider,
+                        )
+                    }
+                }
+                db.setTransactionSuccessful()
+            } finally {
+                db.endTransaction()
+            }
+        }
+        return shortcuts
+    }
+
+    /** Makes the home grid the size of the backup's, in every place the launcher keeps it. */
+    private fun applyGrid(layout: Layout) {
+        val prefs = PreferenceManager.getInstance(context)
+        val hotseat = prefs.hotseatColumns.get()
+        val gridInfo = DeviceProfileOverrides.DBGridInfo(
+            numHotseatColumns = hotseat,
+            numRows = layout.rows,
+            numColumns = layout.columns,
+        )
+        val gridState = DeviceGridState(
+            layout.columns,
+            layout.rows,
+            hotseat,
+            InvariantDeviceProfile.TYPE_PHONE,
+            gridInfo.dbFile,
+            GridType.GRID_TYPE_ANY,
+        )
+        gridState.writeToPrefs(context, true)
+        gridState.writeToPrefs(context)
+        InvariantDeviceProfile.INSTANCE.get(context).dbFile = gridInfo.dbFile
+        prefs.sp.edit()
+            .putInt(prefs.workspaceColumns.key, layout.columns)
+            .putInt(prefs.workspaceRows.key, layout.rows)
+            .commit()
+    }
+
+    /** Pins the imported app shortcuts, keeping whatever the launcher has pinned already. */
+    private fun pinShortcuts(shortcuts: Map<String, Set<String>>) {
+        if (shortcuts.isEmpty()) return
+        val launcherApps = context.getSystemService(LauncherApps::class.java) ?: return
+        val user = Process.myUserHandle()
+        for ((packageName, ids) in shortcuts) {
+            val pinned = LinkedHashSet<String>()
+            val current = ShortcutRequest(context, user)
+                .forPackage(packageName)
+                .query(ShortcutRequest.PINNED or LauncherApps.ShortcutQuery.FLAG_GET_KEY_FIELDS_ONLY)
+            if (current.wasSuccess()) current.mapTo(pinned) { it.id }
+            pinned.addAll(ids)
+            try {
+                launcherApps.pinShortcuts(packageName, pinned.toList(), user)
+            } catch (e: SecurityException) {
+                Log.w(TAG, "Could not pin the imported shortcuts of $packageName", e)
+            } catch (e: IllegalStateException) {
+                Log.w(TAG, "Could not pin the imported shortcuts of $packageName", e)
+            }
+        }
+    }
+
+    private companion object {
+        const val TAG = "SmartLauncherImport"
+
+        const val SL_DB_ENTRY = "databases/ginlemon.flower.db"
+        const val SL_PREFS_DIR = "shared_prefs/"
+        const val SL_PROFILE_KEY_PREFIX = "launcher_profile_"
+        const val T_HOME = "HomeItem"
+        const val T_LAUNCHABLE = "Launchable"
+        const val T_ACTION = "Action"
+        const val T_WIDGET = "Widget"
+
+        /** `Action.type` of a folder; every other type seen opens an app. */
+        const val SL_ACTION_TYPE_FOLDER = 9
+
+        /** `Widget.type` of an ordinary app widget; the other types are Smart Launcher's own. */
+        const val SL_WIDGET_TYPE_APP = 1
+
+        /** Smart Launcher's user ids: the phone's owner, and "no user" on folders. */
+        const val OWNER_USER = 0
+        const val NO_USER = -1
+
+        const val TEMP_DIR_PREFIX = "smartlauncher_"
+        const val SL_DB = "smartlauncher.db"
+        const val PREFS_PREFIX = "prefs_"
+        const val STAGED_DB = "workspace.db"
+
+        /** Far above any real backup's database; a larger entry is not a backup. */
+        const val MAX_ENTRY_BYTES = 64L * 1024 * 1024
+
+        const val MIN_GRID = 4
+        const val MAX_GRID = 20
+
+        /** The intent Launcher3 itself stores for an app icon. */
+        fun launchIntentFor(component: ComponentName): Intent =
+            Intent(Intent.ACTION_MAIN)
+                .addCategory(Intent.CATEGORY_LAUNCHER)
+                .setComponent(component)
+                .setFlags(Intent.FLAG_ACTIVITY_NEW_TASK or Intent.FLAG_ACTIVITY_RESET_TASK_IF_NEEDED)
+    }
+}

flexera/src/app/flexera/backup/SmartLauncherImportScreen.kt

@@ -0,0 +1,198 @@
+package app.flexera.backup
+
+import android.app.Activity
+import android.content.Intent
+import android.widget.Toast
+import androidx.activity.compose.LocalOnBackPressedDispatcherOwner
+import androidx.activity.compose.rememberLauncherForActivityResult
+import androidx.activity.result.contract.ActivityResultContracts
+import androidx.compose.foundation.layout.Box
+import androidx.compose.foundation.layout.fillMaxSize
+import androidx.compose.foundation.layout.fillMaxWidth
+import androidx.compose.foundation.layout.padding
+import androidx.compose.material3.Button
+import androidx.compose.material3.CircularProgressIndicator
+import androidx.compose.material3.Text
+import androidx.compose.runtime.Composable
+import androidx.compose.runtime.DisposableEffect
+import androidx.compose.runtime.LaunchedEffect
+import androidx.compose.runtime.getValue
+import androidx.compose.runtime.remember
+import androidx.compose.ui.Alignment
+import androidx.compose.ui.Modifier
+import androidx.compose.ui.platform.LocalContext
+import androidx.compose.ui.res.pluralStringResource
+import androidx.compose.ui.res.stringResource
+import androidx.compose.ui.unit.dp
+import androidx.core.net.toUri
+import androidx.lifecycle.compose.collectAsStateWithLifecycle
+import androidx.lifecycle.viewmodel.compose.viewModel
+import androidx.navigation.NavGraphBuilder
+import androidx.navigation.compose.composable
+import androidx.navigation.toRoute
+import app.flexera.backup.SmartLauncherImportViewModel.Event
+import app.flexera.backup.SmartLauncherImportViewModel.State
+import app.lawnchair.ui.preferences.LocalIsExpandedScreen
+import app.lawnchair.ui.preferences.LocalNavController
+import app.lawnchair.ui.preferences.components.layout.PreferenceGroup
+import app.lawnchair.ui.preferences.components.layout.PreferenceLayout
+import app.lawnchair.ui.preferences.components.layout.PreferenceTemplate
+import app.lawnchair.ui.preferences.navigation.ImportSmartLauncherBackup
+import app.lawnchair.util.BackHandler
+import app.lawnchair.util.restartLauncher
+import com.android.launcher3.R
+import java.util.Base64
+
+/**
+ * The screen between choosing a Smart Launcher backup and importing it. It says what the file
+ * holds, what will not come along and what the import replaces, and waits for the owner's word.
+ */
+fun NavGraphBuilder.smartLauncherImportGraph() {
+    composable<ImportSmartLauncherBackup> { entry ->
+        val route: ImportSmartLauncherBackup = entry.toRoute()
+        val backup = remember { String(Base64.getDecoder().decode(route.base64Uri)).toUri() }
+        val viewModel: SmartLauncherImportViewModel = viewModel()
+        DisposableEffect(Unit) {
+            viewModel.open(backup)
+            onDispose { }
+        }
+        SmartLauncherImportScreen(viewModel)
+    }
+}
+
+@Composable
+private fun SmartLauncherImportScreen(viewModel: SmartLauncherImportViewModel) {
+    val context = LocalContext.current
+    val state by viewModel.state.collectAsStateWithLifecycle()
+
+    LaunchedEffect(Unit) {
+        viewModel.events.collect { event ->
+            when (event) {
+                Event.Imported -> {
+                    Toast.makeText(context, R.string.flexera_import_done, Toast.LENGTH_SHORT).show()
+                    restartLauncher(context)
+                }
+
+                Event.Failed -> Toast.makeText(context, R.string.flexera_import_failed, Toast.LENGTH_LONG).show()
+            }
+        }
+    }
+
+    PreferenceLayout(
+        label = stringResource(id = R.string.flexera_import_smart_launcher),
+        backArrowVisible = !LocalIsExpandedScreen.current,
+    ) {
+        when (val current = state) {
+            State.Reading -> Box(modifier = Modifier.fillMaxSize()) {
+                CircularProgressIndicator(modifier = Modifier.align(Alignment.Center))
+            }
+
+            State.Unreadable -> {
+                val back = LocalOnBackPressedDispatcherOwner.current?.onBackPressedDispatcher
+                LaunchedEffect(Unit) {
+                    Toast.makeText(context, R.string.flexera_import_unreadable, Toast.LENGTH_LONG).show()
+                    back?.onBackPressed()
+                }
+            }
+
+            is State.Ready -> {
+                // Leaving in the middle of an import would leave the home screens half replaced.
+                if (current.importing) BackHandler {}
+                BackupContents(current.info)
+                Box(
+                    modifier = Modifier
+                        .fillMaxWidth()
+                        .padding(top = 8.dp)
+                        .padding(horizontal = 16.dp),
+                ) {
+                    Button(
+                        onClick = viewModel::import,
+                        modifier = Modifier.fillMaxWidth(),
+                        enabled = !current.importing,
+                    ) {
+                        Text(text = stringResource(id = R.string.flexera_import_action))
+                    }
+                }
+            }
+        }
+    }
+}
+
+@Composable
+private fun BackupContents(info: SmartLauncherBackupConverter.Info) {
+    PreferenceGroup(heading = stringResource(id = R.string.flexera_import_found)) {
+        InfoRow(
+            R.string.flexera_import_screens,
+            stringResource(id = R.string.flexera_import_screens_value, info.screens, info.columns, info.rows),
+        )
+        if (info.apps > 0) InfoRow(R.string.flexera_import_apps, info.apps.toString())
+        if (info.folders > 0) {
+            InfoRow(
+                R.string.flexera_import_folders,
+                pluralStringResource(
+                    id = R.plurals.flexera_import_folders_value,
+                    count = info.appsInFolders,
+                    info.folders,
+                    info.appsInFolders,
+                ),
+            )
+        }
+        if (info.widgets > 0) {
+            InfoRow(R.string.flexera_import_widgets, stringResource(id = R.string.flexera_import_widgets_value, info.widgets))
+        }
+    }
+    if (info.ownWidgets > 0 || info.skipped > 0) {
+        PreferenceGroup(heading = stringResource(id = R.string.flexera_import_left_out)) {
+            if (info.ownWidgets > 0) {
+                InfoRow(
+                    R.string.flexera_import_own_widgets,
+                    pluralStringResource(
+                        id = R.plurals.flexera_import_own_widgets_value,
+                        count = info.ownWidgets,
+                        info.ownWidgets,
+                    ),
+                )
+            }
+            if (info.skipped > 0) {
+                InfoRow(
+                    R.string.flexera_import_skipped,
+                    pluralStringResource(id = R.plurals.flexera_import_skipped_value, count = info.skipped, info.skipped),
+                )
+            }
+        }
+    }
+    PreferenceGroup(heading = stringResource(id = R.string.flexera_import_effect)) {
+        PreferenceTemplate(
+            title = { Text(text = stringResource(id = R.string.flexera_import_effect_title)) },
+            description = { Text(text = stringResource(id = R.string.flexera_import_effect_body)) },
+        )
+    }
+}
+
+@Composable
+private fun InfoRow(labelRes: Int, value: String) {
+    PreferenceTemplate(
+        title = { Text(text = stringResource(id = labelRes)) },
+        description = { Text(text = value) },
+    )
+}
+
+/** Returns an action that lets the owner pick a backup file and then opens the import screen for it. */
+@Composable
+fun smartLauncherImportOpener(): () -> Unit {
+    val navController = LocalNavController.current
+    val request = rememberLauncherForActivityResult(ActivityResultContracts.StartActivityForResult()) { result ->
+        if (result.resultCode != Activity.RESULT_OK) return@rememberLauncherForActivityResult
+        val uri = result.data?.data ?: return@rememberLauncherForActivityResult
+        val base64Uri = Base64.getEncoder().encodeToString(uri.toString().toByteArray())
+        navController.navigate(ImportSmartLauncherBackup(base64Uri))
+    }
+    return {
+        // A .slbk file has no file type Android knows, so every file is offered.
+        request.launch(
+            Intent(Intent.ACTION_OPEN_DOCUMENT)
+                .addCategory(Intent.CATEGORY_OPENABLE)
+                .setType("*/*"),
+        )
+    }
+}

flexera/src/app/flexera/backup/SmartLauncherImportViewModel.kt

@@ -0,0 +1,74 @@
+package app.flexera.backup
+
+import android.app.Application
+import android.net.Uri
+import android.util.Log
+import androidx.lifecycle.AndroidViewModel
+import androidx.lifecycle.viewModelScope
+import kotlinx.coroutines.channels.Channel
+import kotlinx.coroutines.flow.MutableStateFlow
+import kotlinx.coroutines.flow.StateFlow
+import kotlinx.coroutines.flow.asStateFlow
+import kotlinx.coroutines.flow.receiveAsFlow
+import kotlinx.coroutines.launch
+
+/**
+ * Holds one Smart Launcher import: reads the chosen backup, shows what is in it, and on the
+ * owner's word replaces the home screens with it. Same shape as Lawnchair's view model for a
+ * Nova backup.
+ */
+internal class SmartLauncherImportViewModel(application: Application) : AndroidViewModel(application) {
+
+    sealed interface Event {
+        data object Imported : Event
+        data object Failed : Event
+    }
+
+    sealed interface State {
+        data object Reading : State
+        data object Unreadable : State
+        data class Ready(val info: SmartLauncherBackupConverter.Info, val importing: Boolean = false) : State
+    }
+
+    private var converter: SmartLauncherBackupConverter? = null
+
+    private val mutableState = MutableStateFlow<State>(State.Reading)
+    val state: StateFlow<State> = mutableState.asStateFlow()
+
+    private val eventChannel = Channel<Event>(Channel.BUFFERED)
+    val events = eventChannel.receiveAsFlow()
+
+    fun open(backup: Uri) {
+        if (converter != null) return
+        val converter = SmartLauncherBackupConverter(getApplication(), backup).also { converter = it }
+        viewModelScope.launch {
+            mutableState.value = try {
+                State.Ready(converter.parseInfo())
+            } catch (t: Throwable) {
+                Log.e(TAG, "Not a Smart Launcher backup this can read", t)
+                State.Unreadable
+            }
+        }
+    }
+
+    fun import() {
+        val ready = mutableState.value as? State.Ready ?: return
+        val converter = converter ?: return
+        if (ready.importing) return
+        viewModelScope.launch {
+            mutableState.value = ready.copy(importing = true)
+            try {
+                converter.convertAndRestore()
+                eventChannel.send(Event.Imported)
+            } catch (t: Throwable) {
+                Log.e(TAG, "Import failed", t)
+                mutableState.value = ready.copy(importing = false)
+                eventChannel.send(Event.Failed)
+            }
+        }
+    }
+
+    private companion object {
+        const val TAG = "SmartLauncherImport"
+    }
+}

flexera/src/app/flexera/drawer/FlexeraDrawer.kt

@@ -47,9 +47,54 @@ object FlexeraDrawer {
     @JvmStatic
     fun sectionHeader(sectionName: String): AdapterItem = SectionHeaderItem(sectionName)
 
+    /** The sizes the owner can give the list's rows (Settings, App drawer). */
+    enum class RowSize(val key: String) { COMPACT("compact"), COMFY("comfy") }
+
+    /** The row size in use. Changing the setting recreates the launcher. */
     @JvmStatic
-    fun createSectionHeader(inflater: LayoutInflater, parent: ViewGroup): View =
-        inflater.inflate(R.layout.flexera_all_apps_section_header, parent, false).also(::applySidePadding)
+    fun rowSize(context: Context): RowSize {
+        val key = PreferenceManager.getInstance(context).flexeraDrawerRowSize.get()
+        return RowSize.entries.firstOrNull { it.key == key } ?: RowSize.COMPACT
+    }
+
+    /** Picks the dimension of the row size in use. */
+    private fun sized(context: Context, compact: Int, comfy: Int): Int =
+        if (rowSize(context) == RowSize.COMFY) comfy else compact
+
+    /** How tall a letter header is. */
+    @JvmStatic
+    fun headerHeight(context: Context): Int = context.resources.getDimensionPixelSize(
+        sized(context, R.dimen.flexera_drawer_header_height, R.dimen.flexera_drawer_header_height_comfy),
+    )
+
+    @JvmStatic
+    fun createSectionHeader(inflater: LayoutInflater, parent: ViewGroup): View {
+        val header = inflater.inflate(R.layout.flexera_all_apps_section_header, parent, false) as TextView
+        val context = header.context
+        val res = context.resources
+        // The layout carries the compact sizes; the row size in use has the last word.
+        header.layoutParams.height = headerHeight(context)
+        header.setTextSize(
+            TypedValue.COMPLEX_UNIT_PX,
+            res.getDimension(
+                sized(context, R.dimen.flexera_drawer_header_text_size, R.dimen.flexera_drawer_header_text_size_comfy),
+            ),
+        )
+        header.setPadding(
+            header.paddingLeft,
+            header.paddingTop,
+            header.paddingRight,
+            res.getDimensionPixelSize(
+                sized(
+                    context,
+                    R.dimen.flexera_drawer_header_padding_bottom,
+                    R.dimen.flexera_drawer_header_padding_bottom_comfy,
+                ),
+            ),
+        )
+        applySidePadding(header)
+        return header
+    }
 
     /**
      * True when the owner has moved the wave alphabet to the left edge (PRD AD-15). Changing the
@@ -93,10 +138,17 @@ object FlexeraDrawer {
         // Other icons share the "all apps" display type (search results, for one); this tag
         // tells list rows apart from them.
         icon.setTag(R.id.flexera_drawer_row, true)
-        val textSize = res.getDimension(R.dimen.flexera_drawer_row_text_size)
-        icon.layoutParams.height = rowHeight(icon.context)
-        icon.compoundDrawablePadding = res.getDimensionPixelSize(R.dimen.flexera_drawer_row_icon_gap)
-        icon.setTextSize(TypedValue.COMPLEX_UNIT_PX, textSize)
+        val context = icon.context
+        icon.layoutParams.height = rowHeight(context)
+        icon.setIconSizeOverride(
+            res.getDimensionPixelSize(
+                sized(context, R.dimen.flexera_drawer_row_icon_size, R.dimen.flexera_drawer_row_icon_size_comfy),
+            ),
+        )
+        icon.compoundDrawablePadding = res.getDimensionPixelSize(
+            sized(context, R.dimen.flexera_drawer_row_icon_gap, R.dimen.flexera_drawer_row_icon_gap_comfy),
+        )
+        icon.setTextSize(TypedValue.COMPLEX_UNIT_PX, rowTextSize(context))
         applySidePadding(icon)
         // The drawer has no background, so names sit directly on the dimmed wallpaper: white,
         // with a soft shadow to stay readable over light areas.
@@ -118,13 +170,17 @@ object FlexeraDrawer {
      * the row grows instead.
      */
     @JvmStatic
-    fun rowHeight(context: Context): Int {
-        val res = context.resources
-        return max(
-            res.getDimensionPixelSize(R.dimen.flexera_drawer_row_height),
-            (res.getDimension(R.dimen.flexera_drawer_row_text_size) * ROW_HEIGHT_IN_TEXT_SIZES).toInt(),
-        )
-    }
+    fun rowHeight(context: Context): Int = max(
+        context.resources.getDimensionPixelSize(
+            sized(context, R.dimen.flexera_drawer_row_height, R.dimen.flexera_drawer_row_height_comfy),
+        ),
+        (rowTextSize(context) * ROW_HEIGHT_IN_TEXT_SIZES).toInt(),
+    )
+
+    /** The size of an app name in a row, in pixels. */
+    private fun rowTextSize(context: Context): Float = context.resources.getDimension(
+        sized(context, R.dimen.flexera_drawer_row_text_size, R.dimen.flexera_drawer_row_text_size_comfy),
+    )
 
     /** The least a row's height may be, in name text sizes: two lines of text and some air. */
     private const val ROW_HEIGHT_IN_TEXT_SIZES = 2.4f
@@ -304,7 +360,7 @@ object FlexeraDrawer {
     ): Boolean {
         val wave = waveAlphabet(appsView) ?: return false
         val offset = layoutOffset(wave, dragLayer)
-        return wave.isOnStripBand(ev.x - offset.x, ev.y - offset.y)
+        return wave.isOnHomeBand(ev.x - offset.x, ev.y - offset.y)
     }
 
     /**

flexera/src/app/flexera/drawer/WaveAlphabetView.kt

@@ -13,6 +13,7 @@ import android.os.Bundle
 import android.view.HapticFeedbackConstants
 import android.view.MotionEvent
 import android.view.View
+import android.view.ViewConfiguration
 import android.view.ViewTreeObserver
 import android.view.animation.DecelerateInterpolator
 import android.widget.SeekBar
@@ -50,7 +51,9 @@ import kotlin.math.roundToInt
  * as the last.
  *
  * The view covers the whole drawer so it has room to draw the wave, but it only takes touches
- * that start on the strip; every other touch falls through to the list underneath.
+ * that start on the strip; every other touch falls through to the list underneath. The very
+ * edge is also where Android starts its Back swipe. The strip leaves that to Android: a touch
+ * there becomes a scrub only once it moves up or down or rests, and a sideways swipe goes back.
  *
  * [beginScrub], [moveScrub] and [endScrub] are public so that another gesture, such as swipe up
  * and hold from the home screen (PRD AD-17), can hand its touch over to the alphabet.
@@ -79,7 +82,9 @@ class WaveAlphabetView(
     private val waveWidth = res.getDimension(R.dimen.flexera_wave_width)
     private val farMargin = res.getDimension(R.dimen.flexera_wave_far_margin)
     private val letterSize = res.getDimension(R.dimen.flexera_wave_letter_size)
-    private val headerHeight = res.getDimensionPixelSize(R.dimen.flexera_drawer_header_height)
+    private val headerHeight = FlexeraDrawer.headerHeight(context)
+    private val homeTouchWidth = res.getDimension(R.dimen.flexera_wave_home_touch_width)
+    private val touchSlop = ViewConfiguration.get(context).scaledTouchSlop
 
     /** The section name Launcher3 gives the work profile's info card, an "i" in a circle. */
     private val workInfoSection = res.getString(R.string.work_profile_edu_section)
@@ -153,11 +158,25 @@ class WaveAlphabetView(
     private var fingerY = 0f
     private var selected = -1
 
+    // A touch that began on the edge strip Android uses for Back, before it is known whether
+    // it is a scrub: where it went down, where it is now, and the timer that makes a touch
+    // at rest a scrub.
+    private var waitingForBack = false
+    private var downX = 0f
+    private var downY = 0f
+    private var lastX = 0f
+    private var lastY = 0f
+    private val scrubAfterRest = Runnable {
+        if (waitingForBack) {
+            waitingForBack = false
+            beginScrub(lastX, lastY)
+        }
+    }
+
     /** 0 when the strip is at rest, 1 when the wave is fully out. Animated on touch down and up. */
     private var press = 0f
     private var pressAnimator: ValueAnimator? = null
 
-    private val exclusionRect = Rect()
     private val location = IntArray(2)
     private val otherLocation = IntArray(2)
 
@@ -250,16 +269,9 @@ class WaveAlphabetView(
             restingLetterSize = min(letterSize, spacing * MAX_LETTER_SHARE_OF_SLOT)
         }
 
-        // The strip sits where Android's back swipe starts. A home app may reserve the whole
-        // edge, so the scrub never turns into Back.
-        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.Q) {
-            if (onLeft) {
-                exclusionRect.set(0, stripTop.toInt(), touchWidth.toInt(), stripBottom.toInt())
-            } else {
-                exclusionRect.set((width - touchWidth).toInt(), stripTop.toInt(), width, stripBottom.toInt())
-            }
-            systemGestureExclusionRects = listOf(exclusionRect)
-        }
+        // The strip does not reserve the edge for itself: Android's Back swipe starts there,
+        // and the owner closes the drawer with it. The two share the edge by direction, see
+        // onTouchEvent.
     }
 
     override fun onSizeChanged(w: Int, h: Int, oldw: Int, oldh: Int) {
@@ -275,6 +287,7 @@ class WaveAlphabetView(
 
     override fun onDetachedFromWindow() {
         viewTreeObserver.removeOnGlobalLayoutListener(layoutListener)
+        stopWaitingForBack()
         pressAnimator?.cancel()
         super.onDetachedFromWindow()
     }
@@ -384,13 +397,29 @@ class WaveAlphabetView(
      * True when this point lies on the band along the edge that the letters occupy, whether or
      * not the drawer is open. Scrub from home (PRD AD-10) asks this while the drawer is closed.
      */
-    fun isOnStripBand(x: Float, y: Float): Boolean {
+    fun isOnStripBand(x: Float, y: Float): Boolean = isOnBand(x, y, touchWidth)
+
+    /** The same for the home screen, where the band is narrower because nothing shows it. */
+    fun isOnHomeBand(x: Float, y: Float): Boolean = isOnBand(x, y, homeTouchWidth)
+
+    private fun isOnBand(x: Float, y: Float, bandWidth: Float): Boolean {
         if (layoutDirty) computeLayout()
         if (letters.isEmpty()) return false
-        val onEdge = if (onLeft) x <= touchWidth else x >= width - touchWidth
+        val onEdge = if (onLeft) x <= bandWidth else x >= width - bandWidth
         return onEdge && y >= stripTop - verticalMargin && y <= stripBottom + verticalMargin
     }
 
+    /**
+     * True when a touch at [x] starts on the strip of edge where Android may begin its Back
+     * swipe. With three-button navigation there is no such strip.
+     */
+    private fun isInBackSwipeZone(x: Float): Boolean {
+        if (Build.VERSION.SDK_INT < Build.VERSION_CODES.Q) return false
+        @Suppress("DEPRECATION")
+        val insets = rootWindowInsets?.systemGestureInsets ?: return false
+        return if (onLeft) x < insets.left else x > width - insets.right
+    }
+
     @SuppressLint("ClickableViewAccessibility")
     override fun onTouchEvent(event: MotionEvent): Boolean {
         when (event.actionMasked) {
@@ -398,16 +427,50 @@ class WaveAlphabetView(
                 if (!isOnStrip(event.x, event.y)) return false
                 // Keep the drawer from scrolling or closing under the thumb.
                 parent?.requestDisallowInterceptTouchEvent(true)
-                beginScrub(event.x, event.y)
+                downX = event.x
+                downY = event.y
+                lastX = event.x
+                lastY = event.y
+                if (isInBackSwipeZone(event.x)) {
+                    // This may be the start of Android's Back swipe, which moves sideways.
+                    // Show nothing until the touch says which it is: a move up or down or a
+                    // short rest is a scrub, a move sideways is left to Android.
+                    waitingForBack = true
+                    postDelayed(scrubAfterRest, REST_BEFORE_SCRUB_MS)
+                } else {
+                    beginScrub(event.x, event.y)
+                }
                 return true
             }
             MotionEvent.ACTION_MOVE -> {
-                if (!scrubbing) return false
-                moveScrub(event.x, event.y)
+                lastX = event.x
+                lastY = event.y
+                if (waitingForBack) {
+                    val dx = abs(event.x - downX)
+                    val dy = abs(event.y - downY)
+                    if (dy > touchSlop && dy >= dx) {
+                        stopWaitingForBack()
+                        beginScrub(event.x, event.y)
+                    } else if (dx > touchSlop) {
+                        // Sideways: Android takes the touch from here on, and with it Back.
+                        stopWaitingForBack()
+                    }
+                } else if (scrubbing) {
+                    moveScrub(event.x, event.y)
+                }
                 return true
             }
-            MotionEvent.ACTION_UP, MotionEvent.ACTION_CANCEL -> {
-                if (!scrubbing) return false
+            MotionEvent.ACTION_UP -> {
+                if (waitingForBack) {
+                    // Down and up without moving: a tap on a letter.
+                    stopWaitingForBack()
+                    beginScrub(event.x, event.y)
+                }
+                endScrub()
+                return true
+            }
+            MotionEvent.ACTION_CANCEL -> {
+                stopWaitingForBack()
                 endScrub()
                 return true
             }
@@ -415,6 +478,11 @@ class WaveAlphabetView(
         return scrubbing
     }
 
+    private fun stopWaitingForBack() {
+        waitingForBack = false
+        removeCallbacks(scrubAfterRest)
+    }
+
     /** Starts a scrub with the finger at ([x], [y]) in this view's coordinates. */
     fun beginScrub(x: Float, y: Float) {
         refreshIfChanged()
@@ -643,6 +711,12 @@ class WaveAlphabetView(
         /** The tallest a resting letter may be, as a share of the vertical room it has. */
         const val MAX_LETTER_SHARE_OF_SLOT = 0.85f
 
+        /**
+         * How long a touch on the Back strip may rest before it counts as a scrub. Long
+         * enough for a Back swipe to have started moving, short enough not to be felt.
+         */
+        const val REST_BEFORE_SCRUB_MS = 130L
+
         const val PRESS_IN_MS = 110L
         const val PRESS_OUT_MS = 220L
 

flexera/src/app/flexera/ui/FlexeraAbout.kt

@@ -47,6 +47,7 @@ import androidx.lifecycle.Lifecycle
 import androidx.lifecycle.LifecycleEventObserver
 import androidx.lifecycle.compose.LocalLifecycleOwner
 import androidx.lifecycle.compose.collectAsStateWithLifecycle
+import app.flexera.update.CheckProblem
 import app.flexera.update.FlexeraRelease
 import app.flexera.update.FlexeraUpdater
 import app.flexera.update.UpdateFailure
@@ -294,7 +295,7 @@ private fun UpdateStatusRow(state: UpdateState) {
             if (release == null) {
                 ClickablePreference(
                     label = stringResource(id = R.string.flexera_update_check),
-                    subtitle = stringResource(id = R.string.flexera_update_check_failed),
+                    subtitle = checkFailureText(state),
                     onClick = { FlexeraUpdater.check(context) },
                 )
             } else {
@@ -379,6 +380,25 @@ private fun QrCode(text: String, description: String, modifier: Modifier = Modif
     }
 }
 
+/**
+ * Says why a check for updates failed and what to do about it, then the error's own words, which
+ * are what someone looking for the cause will ask for.
+ */
+@Composable
+private fun checkFailureText(state: UpdateState.Failed): String {
+    val host = FlexeraUpdater.SERVER_HOST
+    val reason = when (state.problem) {
+        CheckProblem.NO_PERMISSION -> stringResource(id = R.string.flexera_update_failed_no_permission)
+        CheckProblem.SERVER_NOT_FOUND -> stringResource(id = R.string.flexera_update_failed_not_found, host)
+        CheckProblem.NOT_SECURE -> stringResource(id = R.string.flexera_update_failed_not_secure, host)
+        CheckProblem.SERVER_ERROR -> stringResource(id = R.string.flexera_update_failed_server_error, host)
+        CheckProblem.BAD_ANSWER -> stringResource(id = R.string.flexera_update_failed_bad_answer, host)
+        CheckProblem.NO_ANSWER, null -> stringResource(id = R.string.flexera_update_failed_no_answer, host)
+    }
+    val detail = state.detail ?: return reason
+    return reason + "\n" + stringResource(id = R.string.flexera_update_failed_detail, detail)
+}
+
 @Composable
 private fun downloadSizeText(context: Context, release: FlexeraRelease): String =
     if (release.apkSize > 0) {

flexera/src/app/flexera/ui/FlexeraDrawerSettings.kt

@@ -4,11 +4,14 @@ import androidx.compose.runtime.Composable
 import androidx.compose.ui.Modifier
 import androidx.compose.ui.platform.LocalContext
 import androidx.compose.ui.res.stringResource
+import app.flexera.drawer.FlexeraDrawer
 import app.lawnchair.preferences.getAdapter
 import app.lawnchair.preferences.preferenceManager
 import app.lawnchair.preferences2.preferenceManager2
 import app.lawnchair.ui.preferences.LocalIsExpandedScreen
 import app.lawnchair.ui.preferences.components.NavigationActionPreference
+import app.lawnchair.ui.preferences.components.controls.ListPreference
+import app.lawnchair.ui.preferences.components.controls.ListPreferenceEntry
 import app.lawnchair.ui.preferences.components.controls.SwitchPreference
 import app.lawnchair.ui.preferences.components.layout.PreferenceGroup
 import app.lawnchair.ui.preferences.components.layout.PreferenceLayout
@@ -75,6 +78,18 @@ fun FlexeraDrawerSettings(modifier: Modifier = Modifier) {
         // No background colour or opacity here: the drawer is transparent with white text, and a
         // light panel behind white text would make the list unreadable.
         PreferenceGroup(heading = stringResource(id = R.string.style)) {
+            ListPreference(
+                adapter = prefs.flexeraDrawerRowSize.getAdapter(),
+                entries = listOf(
+                    ListPreferenceEntry(FlexeraDrawer.RowSize.COMPACT.key) {
+                        stringResource(id = R.string.flexera_row_size_compact)
+                    },
+                    ListPreferenceEntry(FlexeraDrawer.RowSize.COMFY.key) {
+                        stringResource(id = R.string.flexera_row_size_comfy)
+                    },
+                ),
+                label = stringResource(id = R.string.flexera_row_size),
+            )
             SwitchPreference(
                 label = stringResource(id = R.string.pref_all_apps_search_bar_background),
                 adapter = prefs2.appDrawerSearchBarBackground.getAdapter(),

flexera/src/app/flexera/update/FlexeraUpdater.kt

@@ -24,6 +24,8 @@ import java.io.File
 import java.io.IOException
 import java.net.HttpURLConnection
 import java.net.URL
+import java.net.UnknownHostException
+import javax.net.ssl.SSLException
 import kotlinx.coroutines.CoroutineScope
 import kotlinx.coroutines.Dispatchers
 import kotlinx.coroutines.SupervisorJob
@@ -31,6 +33,7 @@ import kotlinx.coroutines.flow.MutableStateFlow
 import kotlinx.coroutines.flow.StateFlow
 import kotlinx.coroutines.flow.asStateFlow
 import kotlinx.coroutines.launch
+import org.json.JSONException
 import org.json.JSONObject
 
 /** One published version of Flexera Launcher. */
@@ -56,6 +59,31 @@ enum class UpdateFailure {
     WRONG_FILE,
 }
 
+/**
+ * Why a check for updates failed, as far as the phone can tell. The About screen says it in
+ * words, because "could not reach the server" alone leaves the owner guessing between the
+ * connection, a VPN, the server and the phone's own settings.
+ */
+enum class CheckProblem {
+    /** Android does not let this app use the network (a per-app switch on some systems). */
+    NO_PERMISSION,
+
+    /** The server's name could not be looked up. */
+    SERVER_NOT_FOUND,
+
+    /** The server was found but did not answer in time, or refused the connection. */
+    NO_ANSWER,
+
+    /** The encrypted connection could not be set up. */
+    NOT_SECURE,
+
+    /** The server answered, with an error. */
+    SERVER_ERROR,
+
+    /** The server answered with something that is not a release. */
+    BAD_ANSWER,
+}
+
 /** Where the updater currently stands. The About screen shows one row per state. */
 sealed interface UpdateState {
     /** Nothing has been checked since the launcher started. */
@@ -72,8 +100,17 @@ sealed interface UpdateState {
 
     data class ReadyToInstall(val release: FlexeraRelease, val file: File) : UpdateState
 
-    /** [release] is set when the failure happened after a newer version had been found. */
-    data class Failed(val failure: UpdateFailure, val release: FlexeraRelease? = null) : UpdateState
+    /**
+     * [release] is set when the failure happened after a newer version had been found. For a
+     * failed check, [problem] says why and [detail] carries the error's own words, for
+     * whoever has to find the cause.
+     */
+    data class Failed(
+        val failure: UpdateFailure,
+        val release: FlexeraRelease? = null,
+        val problem: CheckProblem? = null,
+        val detail: String? = null,
+    ) : UpdateState
 }
 
 /**
@@ -190,7 +227,7 @@ object FlexeraUpdater {
                 Log.w(TAG, "Update check failed", error)
                 // A background check that fails stays quiet: the About screen keeps what it showed
                 // before, including an update that is already waiting. It tries again in an hour.
-                mutableState.value = if (automatic) before else UpdateState.Failed(UpdateFailure.CHECK)
+                mutableState.value = if (automatic) before else failedCheck(error)
                 return@launch
             }
 
@@ -302,13 +339,41 @@ object FlexeraUpdater {
     private fun isBusy(): Boolean =
         mutableState.value.let { it is UpdateState.Checking || it is UpdateState.Downloading }
 
+    /** The server's name without the scheme, for messages. */
+    @JvmField
+    val SERVER_HOST: String = SERVER.substringAfter("://")
+
+    private class NoNetworkPermissionException : IOException("This app has no network permission")
+    private class ServerErrorException(status: Int) : IOException("The server answered HTTP $status")
+    private class BadAnswerException(message: String) : IOException(message)
+
+    /** Turns the error of a failed check into a state that says what kind of failure it was. */
+    private fun failedCheck(error: Throwable): UpdateState.Failed {
+        val problem = when (error) {
+            is NoNetworkPermissionException, is SecurityException -> CheckProblem.NO_PERMISSION
+            is UnknownHostException -> CheckProblem.SERVER_NOT_FOUND
+            is SSLException -> CheckProblem.NOT_SECURE
+            is ServerErrorException -> CheckProblem.SERVER_ERROR
+            is BadAnswerException, is JSONException -> CheckProblem.BAD_ANSWER
+            else -> CheckProblem.NO_ANSWER
+        }
+        // Android's own error classes keep their names in a release build; this file's are
+        // renamed by the shrinker, and their messages say everything anyway.
+        val name = error.javaClass.name.takeIf { it.startsWith("java") || it.startsWith("android") || it.startsWith("org.json") }
+            ?.substringAfterLast('.')
+        val detail = listOfNotNull(name, error.message).joinToString(": ").take(MAX_DETAIL_LENGTH)
+        return UpdateState.Failed(UpdateFailure.CHECK, problem = problem, detail = detail.ifEmpty { null })
+    }
+
+    private const val MAX_DETAIL_LENGTH = 200
+
     /** Returns the latest published release, or null when nothing has been published yet. */
     private fun fetchLatestRelease(context: Context): FlexeraRelease? {
         val connection = open(context, LATEST_RELEASE_URL)
         try {
             val status = connection.responseCode
             if (status == HttpURLConnection.HTTP_NOT_FOUND) return null
-            if (status != HttpURLConnection.HTTP_OK) throw IOException("Update server answered HTTP $status")
+            if (status != HttpURLConnection.HTTP_OK) throw ServerErrorException(status)
 
             val json = JSONObject(connection.inputStream.bufferedReader().use { it.readText() })
             val tag = json.getString("tag_name")
@@ -326,7 +391,7 @@ object FlexeraUpdater {
                     apkSize = asset.optLong("size", 0L),
                 )
             }
-            throw IOException("Release $tag has no APK attached")
+            throw BadAnswerException("Release $tag has no APK attached")
         } finally {
             connection.disconnect()
         }
@@ -373,7 +438,7 @@ object FlexeraUpdater {
     }
 
     private fun open(context: Context, url: String): HttpURLConnection {
-        if (!FlexeraNetwork.hasInternetPermission(context)) throw IOException("No INTERNET permission")
+        if (!FlexeraNetwork.hasInternetPermission(context)) throw NoNetworkPermissionException()
         return (URL(url).openConnection() as HttpURLConnection).apply {
             connectTimeout = CONNECT_TIMEOUT_MS
             readTimeout = READ_TIMEOUT_MS

flexera/version.properties

@@ -2,4 +2,4 @@
 # build.gradle reads this and derives the Android version code from it
 # (major * 10000 + minor * 100 + patch), so the name and the code can never disagree.
 # flexera/release.ps1 raises it for every release.
-versionName=0.5.0
+versionName=0.7.0

lawnchair/src/app/lawnchair/preferences/PreferenceManager.kt

@@ -224,6 +224,9 @@ class PreferenceManager @Inject constructor(
     // Flexera Launcher: whether drawer rows show the app's latest notification under its name (PRD AD-11).
     val flexeraNotificationPreviews = BoolPref("pref_flexeraNotificationPreviews", true, recreate)
 
+    // Flexera Launcher: how large the rows of the drawer list are, "compact" or "comfy" (FlexeraDrawer.RowSize).
+    val flexeraDrawerRowSize = StringPref("pref_flexeraDrawerRowSize", "compact", recreate)
+
     override fun close() {
         TODO("Not yet implemented")
     }

lawnchair/src/app/lawnchair/ui/preferences/destinations/BackupAndRestorePreference.kt

@@ -40,6 +40,12 @@ fun BackupAndRestorePreference(
                 subtitle = stringResource(R.string.restore_nova_backup_description),
                 onClick = restoreNovaBackupOpener(),
             )
+            // Flexera Launcher: home screens from a Smart Launcher backup (app.flexera.backup).
+            ClickablePreference(
+                label = stringResource(R.string.flexera_import_smart_launcher),
+                subtitle = stringResource(R.string.flexera_import_smart_launcher_description),
+                onClick = app.flexera.backup.smartLauncherImportOpener(),
+            )
         }
     }
 }

lawnchair/src/app/lawnchair/ui/preferences/navigation/PreferenceNavigation.kt

@@ -14,6 +14,7 @@ import androidx.navigation.compose.composable
 import androidx.navigation.navDeepLink
 import androidx.navigation.toRoute
 import app.lawnchair.backup.ui.CreateBackupScreen
+import app.flexera.backup.smartLauncherImportGraph
 import app.lawnchair.backup.ui.restoreBackupGraph
 import app.lawnchair.backup.ui.restoreNovaBackupGraph
 import app.lawnchair.preferences.BasePreferenceManager
@@ -252,5 +253,6 @@ fun PreferenceNavigation(
 
         restoreBackupGraph()
         restoreNovaBackupGraph()
+        smartLauncherImportGraph() // Flexera Launcher: Smart Launcher import
     }
 }

lawnchair/src/app/lawnchair/ui/preferences/navigation/PreferenceRoutes.kt

@@ -224,3 +224,8 @@ data class RestoreBackup(val base64Uri: String) : PreferenceRoute
 
 @Serializable
 data class RestoreNovaBackup(val base64Uri: String) : PreferenceRoute
+
+// Flexera Launcher: import of a Smart Launcher backup (app.flexera.backup). The route has to
+// be declared here because PreferenceRoute is sealed.
+@Serializable
+data class ImportSmartLauncherBackup(val base64Uri: String) : PreferenceRoute

src/com/android/launcher3/BubbleTextView.java

@@ -195,7 +195,8 @@ public class BubbleTextView extends TextView implements ItemInfoUpdateReceiver,
 
     private boolean mLayoutHorizontal;
     private final boolean mIsRtl;
-    private final int mIconSize;
+    // Flexera Launcher: not final, see setIconSizeOverride.
+    private int mIconSize;
 
     @ViewDebug.ExportedProperty(category = "launcher")
     private boolean mHideBadge = false;
@@ -1563,6 +1564,15 @@ public class BubbleTextView extends TextView implements ItemInfoUpdateReceiver,
         return mIconSize;
     }
 
+    /**
+     * Flexera Launcher: the rows of the drawer list come in more than one size, chosen by
+     * the owner at run time, which the layout attribute cannot follow. Call before an icon
+     * is applied.
+     */
+    public void setIconSizeOverride(int iconSize) {
+        mIconSize = iconSize;
+    }
+
     public boolean isDisplaySearchResult() {
         return mDisplay == DISPLAY_SEARCH_RESULT
                 || mDisplay == DISPLAY_SEARCH_RESULT_SMALL

src/com/android/launcher3/widget/util/WidgetSizeHandler.kt

@@ -21,6 +21,7 @@ import android.appwidget.AppWidgetManager.OPTION_APPWIDGET_SIZES
 import android.appwidget.AppWidgetProviderInfo
 import android.content.Context
 import android.os.Bundle
+import android.util.Log
 import android.util.SizeF
 import com.android.launcher3.dagger.ApplicationContext
 import com.android.launcher3.util.Executors
@@ -46,13 +47,24 @@ open class WidgetSizeHandler @Inject constructor(@ApplicationContext private val
         spanY: Int,
     ) {
         Executors.UI_HELPER_EXECUTOR.execute {
-            val widgetManager = AppWidgetManager.getInstance(context)
-            val sizeOptions = WidgetSizes.getWidgetSizeOptions(context, info.provider, spanX, spanY)
-            if (
-                sizeOptions.getWidgetSizeList() !=
-                    widgetManager.getAppWidgetOptions(widgetId).getWidgetSizeList()
-            )
-                widgetManager.updateAppWidgetOptions(widgetId, sizeOptions)
+            // Flexera Launcher: a widget that still waits for "tap to set up" has an id that
+            // Android has reserved but not yet tied to a provider. Android answers a size
+            // update for such an id with a NullPointerException of its own (seen on Android 17:
+            // AppWidgetServiceImpl.updateAppWidgetOptions), which arrives here and used to end
+            // the launcher whenever the grid reloaded with such a widget on a home screen. That
+            // is the normal state after a layout import, so the answer is logged and dropped;
+            // the size is sent again when the widget is set up.
+            try {
+                val widgetManager = AppWidgetManager.getInstance(context)
+                val sizeOptions = WidgetSizes.getWidgetSizeOptions(context, info.provider, spanX, spanY)
+                if (
+                    sizeOptions.getWidgetSizeList() !=
+                        widgetManager.getAppWidgetOptions(widgetId).getWidgetSizeList()
+                )
+                    widgetManager.updateAppWidgetOptions(widgetId, sizeOptions)
+            } catch (e: RuntimeException) {
+                Log.w("WidgetSizeHandler", "Android refused the size of widget $widgetId", e)
+            }
         }
     }